Fully Automatic Flat Glass Handling Equipment Glass Loading Machine
With Safety System
Max.Size of Glass
Min.Size of Glass
Note: We can produce customize machine according to your
This Fully Automatic Flat Glass Handling Equipment Glass Loading
Machine With Safety System is very suitable for loading various
kinds of flat glass, which has the high automatism and steady
performance in the flat glass deep processing. It is mainly used in
loading the glass from another device automatical, such as glass
pallet, L style glass shelf, rack, straight-line double edger,
glass washing machine. Place the glass in the specified location,
after turning on the machine, the sucking begin to work. After it
sucks the glass already, put it on the roller table, transfer the
glass to the frontend device automatically. When it needs to adjust
both the speed of transmission and the loading glass quantity, the
operators modify the
corresponding parameters on the touch screen by both PLC automatic
control and manual control in the
whole process, but manually control is primarily used in adjustment
and maintenance, each action can be
Flat Glass Loading Machine Handing Equipment, Auto Glass Loader
With Safety System
Auto Glass Loading Machine/ Glass Loader/ Glass Handing Equipment +
1. Horizontal motion mechanism, lifting mechanism, roll over stand
on the left side of the beam, on the right top of the conveyor
2. After the signal is given, sucking frame transverse moves to the
glass stacking frame, and stop at a
specific location, the stroke and speed can be controlled by PLC.
3. Arrived at the specified location, the movement of sucking frame
becomes from horizontal to vertical quickly, and be controlled by
4. After arrived at the specified location, the movement of sucking
frame becomes from vertical to
horizontal slowly, and then moves on the surface of the glass, with
5. When the detection switch, which is near the suction cups, in
contact with the glass, the traverse
motor will stop working, meanwhile the vacuum system begins to
work, and the suction cups begins
to absorb the glass.
6. When the vacuum pressure reaches the pressure setting pressure,
the vacuum pump stop working,
and the lifting mechanism of the suction cups will rise up 30mm, in
this location, it’ll stop about few
second for ensuring the single piece glass was well sucked up,
finally the lifting mechanism vertical
up quickly,and then stop at the specified location.
7. When it arrived at the specified location, the sucking frame
back to the origin horizontally and
overturn quickly, keep balance with the transfer table.
8. After arrived at the specified location, the movement of sucking
frame becomes from horizontal to
vertical quickly, with PLC control.
9. About 20 mm from the glass surface, the suction cups release the
glass by blowing the
compressed air. After the location by the transfer table, the glass
quick transferred to the front end
10. When the suction cups are blowing the compressed air, the
lifting mechanism move up and back
to the origin, roll over stand overturn and back to the origin too.
Meanwhile, the glass released from the
signal, and continue to work automatically.
1. It makes glass move easily and solves the difficulties of glass
2. To improve the whole line automation, efficiently reduce the
labor cost and the risk of industrial
injury by manual work.
3. Control system: PLC control, Touchscreen, Manual/automatic
switches, every move has an individual
4. Traveling mechanism: national standard of square tubes, high
precision gear rack transmission,
double straight line guide, straight line guide, and gear rack is
covered by organ shield in order to
defend power into insider of the machine, which can extend its
5. Roller conveyor, the roller is the transmission of round belt.
The drive motor is a gear reducer motor which is transfer stable
6. The pneumatic turnover or servo turnover, but the servo turnover
can be an automatically adjusted angle of suction cup shelf
according to the laying angle of glass. It avoids the phenomenon of
leakage suck because of the deviation in the laying angle of glass.
Pure Nitrile Rubber Roller
Standard Square Tube Profile
Loader Lift Arm
National Standard Wire
Omron PLC control, Japan.
Walking Servo Motor
Lifting Servo Motor
Flat Glass Loading Machine Handing Equipment , Auto Glass Loader
With Safety System
Flat Glass Processing Line Solution, Solar panel glass production